How to Clean Your Laken Classic Aluminum Bottle Cap

Quick Answer

Wash the Laken Classic cap by hand in warm soapy water, rinse thoroughly, and air dry completely before reattaching. Avoid dishwashers and harsh chemicals to preserve the seal and finish.

Step-by-step cleaning routine

1. Disassemble the cap: Unscrew the cap from the bottle and, if possible, gently pull out the rubber seal. Check the manufacturer's instructions first; not all seals are removable. If the seal is stuck, soak the cap in warm water for a few minutes before trying again.
2. Wash in warm soapy water: Use a mild dish soap and warm water. Clean the cap body and the seal with a soft sponge or cloth, paying attention to threads and the groove under the seal. Avoid abrasive scrubbers that can scratch the surface and create hiding spots for bacteria.
3. Rinse thoroughly: Rinse all parts under running water to remove every trace of soap. Residual soap can affect the taste of your drink and attract dirt. Check that no soap bubbles remain in the seal groove.
4. Air dry completely: Place the cap and seal on a clean towel and let them air dry completely. Do not reassemble while wet, as trapped moisture can lead to mold or mildew. Drying upside down helps water drain from the threads.
5. Reassemble and test: Once fully dry, reinsert the seal and screw the cap back onto the bottle. Turn the bottle upside down to confirm there are no leaks. If you notice a leak, check that the seal is seated evenly and not damaged.

What you're cleaning

• Tapón Classic™ para Botellas de Aluminio: The Tapón Classic™ for aluminum bottles provides a hermetic seal and leak prevention with a timeless design. Regular cleaning keeps that seal effective, so your cap continues to prevent spills and leaks in daily use.