How to Replace the Nozzle on Your Flexible Bottle
By LAKEN | Botellas y cantimploras reutilizables desde 1912 | Published: 2026-10-19
Category: How-to Guides
Learn to replace the nozzle on your LAKEN flexible bottle with this step-by-step guide. Keep your discontinued bottle in use with the correct replacement tube.
Quick answer
To replace the nozzle on your LAKEN flexible bottle, remove the old tube, clean the bottle opening, and install the new replacement tube with mouthpiece. This keeps your discontinued bottle functional and leak-free.
Why replace the nozzle?
The nozzle on a flexible bottle can wear out over time, especially with frequent use or exposure to heat and sunlight. A cracked or hardened nozzle can cause leaks or make drinking difficult.
If your LAKEN flexible bottle has been discontinued, you can still find a compatible replacement tube with mouthpiece. This is a cost-effective way to extend the life of your bottle rather than buying a new one.
Choosing the right replacement tube
Make sure the replacement tube is designed for LAKEN flexible bottles. The tube with mouthpiece is intended for this purpose and comes in Ocean Blue.
Check the condition of your bottle's cap and threading. If the cap is damaged, the new tube alone won't prevent leaks. Inspect the bottle opening for cracks or warping before installing the new tube.
Step-by-step nozzle replacement
- Remove the old tube: Twist the bottle cap counterclockwise and pull the old tube out of the cap. If it's stuck, gently wiggle it while pulling. Do not use metal tools that could scratch the cap. Check the old tube for cracks or hardening to confirm replacement is needed.
- Clean the cap and bottle opening: Wash the cap and bottle opening with warm soapy water, then rinse thoroughly. Dry them completely to help the new tube seat properly. Ensure no soap residue remains, as it can affect the seal.
- Insert the new tube: Push the new tube through the cap from the inside so the mouthpiece sits on the outside. Align it with the opening and press firmly until it fits snugly. Make sure the tube is fully seated; a loose fit can cause leaks.
- Reattach the cap and test: Screw the cap back onto the bottle, then turn the bottle upside down and squeeze gently to check for leaks. If leaks occur, remove and re-seat the tube. Test with water before using the bottle on the go.
Product facts
- Tubo con Boquilla para Botellas Flexibles: This replacement drinking tube with mouthpiece is intended for use with LAKEN flexible bottles that have been discontinued. It lets you keep your existing bottle in use without needing to buy a whole new bottle, saving money and reducing waste.
Tubo con Boquilla para Botellas Flexibles
