How to Replace a Tritan Strainer Cap on a Vivac Set
By LAKEN | Botellas y cantimploras reutilizables desde 1912 | Published: 2026-10-20
Category: How-to Guides
Learn how to remove and replace the Tritan strainer cap on your Laken Vivac set, including cleaning tips and common mistakes to avoid.
Quick Answer
To replace the Tritan strainer cap on your Vivac set, remove the old cap by twisting it counterclockwise, clean the threads, and press the new cap into place until it clicks. Make sure the cap is fully seated before cooking to avoid leaks.
Why the Tritan Strainer Cap Matters
The Tritan strainer cap on your Vivac set is designed to make outdoor cooking simpler by letting you drain liquids without a separate colander. Because it is made of Tritan, it stays lightweight and resists impacts, so it can handle the bumps of a campsite kitchen. Replacing it when worn keeps the seal tight and the straining function reliable.
When to Replace the Cap
You should consider a replacement if the cap shows cracks, warping, or a loose fit. A damaged cap can leak hot liquid or let food bits escape, which defeats the purpose of straining. Also, if the Tritan material becomes cloudy or retains odors despite cleaning, replacing the cap is a simple fix.
Step-by-Step Replacement
- Remove the old cap: Turn the Vivac pot upside down and gently twist the old Tritan strainer cap counterclockwise until it releases. If it is stuck, run warm water over the rim for a few seconds to loosen it. Do not use metal tools to pry the cap off; this can scratch the rim or warp the Tritan.
- Clean the rim and threads: Wipe the pot rim and threads with a soft cloth and warm soapy water. Rinse thoroughly and let it air dry completely before installing the new cap. Check for any food residue or grit that could prevent a snug seal.
- Align and press the new cap: Position the new Tritan strainer cap over the opening, aligning any tabs or notches with the rim, then press down evenly until it clicks into place. If it does not seat flat, rotate slightly and try again—do not force it.
- Test the seal and strainer function: Fill the Vivac set with water and tilt it to check for leaks. Then pour through the strainer to confirm it drains smoothly. If water leaks around the rim, remove and reseat the cap before use.
Product Facts
- Tapa Colador de Tritan™ para Batería Vivac: The Tritan strainer cap is made from durable, lightweight Tritan that is safe and easy to transport. It resists everyday outdoor wear while keeping the Vivac set light for carrying on trips.
Tapa Colador de Tritan™ para Batería Vivac
